Development Tools

MCCI offers a wide variety of engineering development and test hardware and software to speed the development of embedded products. The MCCI Catena® products add host/device connectivity for engineering purposes. MCCI's MSCDVT, NCMDVT and MBIMDVT tools allow rapid automated testing and diagnosis of Mass Storage, NCM, and MBIM devices.

• The MCCI Catena 2210 provides two NCM device interfaces for use in testing MirrorLink (Terminal Mode) host systems.
• The MCCI Catena 1910 is the industry-standard protocol analyzer and generator for High-Speed Inter-Chip (HSIC) USB.
• The MCCI USB 3.0 Connection Exerciser is a tool that is used to simulate Host to Device cable removal and attachment. The microcontroller and the high frequency relays within the Exerciser can either be pre-programmed with specific connection patterns, or can be controlled real-time through an auxiliary USB port by a Control PC. This tool makes it possible to find and analyze USB 3.0 connection problems in a well controlled and repeatable manner.
• MSCDVT is a Verification Tool designed specifically for verifying the UAS and BOT Protocols running on a USB device. MSCDVT offers test coverage that is greater than what is possible with other standard test methods.
• The USB Resource Compiler (USBRC) translates a high-level description of a device into error-free descriptors.
• The MCCI Catena 1610 Development Platform allows you to develop and test your USB firmware for the LSI USS820.
• The MCCI Catena 1620 USB On-The-Go Development Platform allows you to develop and test your USB firmware for the ST-Ericsson ISP 1362. The Catena 1620 has 14 programmable endpoints and one control endpoint.
• The MCCI Catena 1630 USB On-The-Go Development Platform allows you to develop and test your USB firmware for the Epson S1R72005. The Catena 1630 has 5 programmable endpoints and endpoint 0.
• The MCCI Catena 1640 Low-Speed USB Device Development Platform allows you to test and develop your USB firmware for the Microchip PIC 18F4550. The Catena 1640 has one IN endpoint and one fixed control IN and OUT endpoint.
• The MCCI Catena 1650 USB Hi-Speed On-The-Go Development Platform allows you to develop and test your USB firmware for the ST-Ericsson ISP1761. The Catena 1650 has 14 programmable endpoints plus one control endpoint.
• The MCCI Catena 1660 USB Hi-Speed Peripheral Firmware Development Platform allows you to develop and test your USB firmware for the ST-Ericsson ISP1583. The Catena 1660 has 7 IN endpoints, 7 OUT endpoints, and one fixed control IN and OUT endpoint.
• The MCCI Catena 1820 USB Hi-Speed Peripheral Firmware Development Platform allows you to develop and test your USB firmware for the Renesas R8A66597. The Catena 1820 has 10 endpoints.
• The MCCI Catena 1850 USB Hi-Speed On-The-Go USB Development Platform allows you to develop and test your USB firmware for the ST-Ericsson ISP1761. The Catena 1850 has 7 IN endpoints, 7 OUT endpoints, and one fixed control IN and OUT endpoint.